Description
The right circular saw blade set for every woodwork
A hand circular saw and a well-assorted selection of different circular saw blades are part of the basic equipment of every hand and do-it-yourselfer. With the right saw blade, precise cuts when cutting mouldings, panels or boards are just as easy as clean longitudinal cuts through thick worktops and wooden beams. Even sawing firewood becomes a very easy task with the right saw blade.
Designed for tough continuous use
Trotec saw blades are made of high-quality carbon steel with very sharply ground wolf teeth. This steel is extremely hard and the saw blades can therefore be ground much thinner. The result is a significantly higher sharpness and service life combined with high wear resistance. Saw blades made of carbon steel blunt more slowly with the same application than saw blades made of lower quality steel.
You have the choice of 2 high quality circular saw blade sets
The high-quality circular saw blade sets are available in 2 different sets. The saw blade sets differ in the number of teeth 24 or 40 and are suitable for Trotec PCSS 10-20V circular saws as well as standard circular saws from other manufacturers with a 16 mm hole.
Small technical knowledge: interesting facts about the selection of the saw blade
The following criteria will help you to choose the right circular saw set.
Saw blade size and inner diameter of the bore
When selecting the set, pay attention to the diameter of the circular saw blade and the bore size of the saw blade holder.
Outer diameter of the saw blade
The larger the diameter of the saw blade, the deeper the circular saw can penetrate the material. However, the saw blade must also fit into the housing of the circular saw.
Mounting (bore)
The most common circular hand saws and some crosscut saws have holders with a diameter of 16 or 20 mm. With reduction rings, larger saw blades can also be used on circular hand saws with smaller saw blade holders.
IInformation on the saw blade holder and the maximum saw blade diameter can be found in the equipment manual of your circular saw.
Cutting quality
The cutting quality is essentially determined by the number of teeth of a circular saw blade. As wood is a comparatively soft material, almost all circular saw blades are suitable for working with wood. The decisive factor for the choice of saw blade is the type of cuts you want to make. Different tooth profiles are recommended for the different types of wood (hard or soft wood) and types of cuts (precise longitudinal cut or rough cut).
Reduced number of teeth (24 teeth)
For coarse cuts, for example to saw firewood for the fireplace, you only need a few teeth on the saw blade. Even very soft wood can be sawn with a low-tooth circular saw blade. You will get fast results, but the quality of cut is comparatively coarse.
Higher number of teeth (40 teeth)
Precise longitudinal and mitre cuts, for example the cutting of skirting boards or wall panels, can be achieved with a higher number of teeth. The more saw teeth on the wood, the cleaner the cut edges and the quality of the cut.
Advantages for the practice:
- Complete sets in Trotec brand quality
- Set of 3 circular saw blades Ø 150 mm (24 teeth)
- Universally suitable for commercially available circular saws with Ø 16 mm adapter
- Wood saw blades made of carbon steel with a long blade life for fast work progress and clean cutting edges
- Application-oriented working through suitable saw blade types
- Practical storage pack at a special price
Technical specifications:
- 3 circular saw blades of carbon steel for woodwork
- Dimensions: Ø 150 mm, bore: 16 mm, tooth thickness: 2.1 mm
- Idling speed: 7,500/min-1
- Peripheral speed: max. 60 m/s
- Teeth: 24 wolf tooth, set
- Recommended use: Fast rough cutting of wood or firewood
Reviews
There are no reviews yet.